Pilamora BATHROOM SEAM TAPE

Peel-and-Stick Bathroom Seam Tape

One center fold. A cleaner finished edge.

4.7/5
7891example reviews
🧼 1. CLEAN📏 2. ALIGN✋ 3. PRESS
5 PRODUCT FEATURES
🛁 A neater tub edge

Cover the visible line along a tub edge with a white strip for a more uniform finish.

📐 Easier corner alignment

Align the center fold with the corner, then press each half against its adjoining surface.

🤍 A coordinated finish

The white finish pairs with white bathroom fixtures. Check the intended seam before applying.

✋ Straightforward application

Clean and dry the surfaces, peel the liner, align the fold, and press both edges flat.

🚰 An edge refresh beyond the tub

Choose a tub edge, sink joint, or toilet base where both sides of the strip can sit flat.

 
 

CHOOSE YOUR PACK

Pay with
White bathroom seam tape roll with a circular demonstration of bathtub application and the finished seam

Peel-and-Stick Bathroom Seam Tape

Regular price $39.98
Regular price $39.98 Sale price $66.63
SAVE 39% Sold out
View full details

A cleaner edge. A simple press.

Give the joints around your tub, sink, and toilet base a cleaner finished edge. The white adhesive strip folds along the center and presses flat against both sides of the seam.

Hands peel the liner, bend the center fold, and press white seam tape along the inside edge of a bathtub

A cleaner line around the tub

An uneven-looking seam can stand out against white fixtures. Align the strip along the joint to give the visible edge a more uniform finish.

Before and after views of a bathtub seam covered with white strip

A center fold that follows the corner

Line up the fold with the joint. Each side of the strip presses against the adjoining surface, so the width is shared across the edge.

Roll of white seam tape with a center fold against a tub edge

For the edges you see every day

Fit the strip along a tub edge, around a sink joint, or along the visible edge at a toilet base. Before peeling the liner, check that the strip can sit flat where you plan to apply it.

Bathroom scene illustrating sink edges, tub edges and toilet bases

Press it flat along both sides

Wipe the surface clean and let it dry. Work along the fold as you press the edges flat to help avoid lifted or uneven spots.

Close-ups showing pressed-flat tape, a lifted edge, and an uneven seam

Choose the length and roll count you need

Both white lengths are 1.50 in (3.8 cm) wide. Measure each run before you choose 10.5 ft (3.2 m) or 16.4 ft (5 m) per roll. Each length comes in packs of 1, 2, 4, or 8 rolls.

How the visible edge changes

BeforeWith the strip
An uneven seam is exposed along the tub edge.A white strip covers the visible line of the joint.
The corner between two surfaces is visible.The center fold lets you press the strip along both sides.

See the strip up close

Applying white seam tape where a bathtub rim meets the tiled wall
Finished white seam tape along a sage-tile washbasin backsplash
Pressing white seam tape around the base of a floor-mounted toilet
White seam tape along a bathtub edge against dark slate-look tiles
Applying white seam tape behind a double-sink vanity
Finished white seam tape around a toilet base on warm stone tile

How to apply the strip

  1. Clean and dry. Wipe away dirt and loose residue along the seam. Let both surfaces dry fully.
  2. Peel and line up the fold. Peel back the liner as you align the center fold with the joint.
  3. Press both edges flat. Press along the strip on both sides of the fold as you work along the seam.
  4. Keep the area dry for 24 hours. Plan the application for a time when the fixture can stay dry.

Before you apply

How can I tell whether the strip will sit flat?

Hold the fold against the corner before peeling the liner. Check whether both sides can rest against the surfaces along the run you want to cover.

Which length should I choose?

Measure the seam you want to cover. Each white roll is 1.50 in wide. Choose 10.5 ft or 16.4 ft per roll based on the length of the run and how many edges you want to cover.

Can I apply it over an uneven seam?

Clear away loose material and residue first. An uneven edge can keep the adhesive strip from lying flat.

When can the area get wet?

Keep the area dry for 24 hours after applying the strip.

Measure your seam and choose a roll

Pick the length per roll and pack size that fit the edges you plan to cover.

Choose Length and Pack

Product details

FinishWhite
Width1.50 in (3.8 cm)
Length per roll10.5 ft (3.2 m) or 16.4 ft (5 m)
Rolls per pack1, 2, 4, or 8
ProfileCenter-fold strip with peel-and-press backing

Customer Reviews

Images from reviews
Loading reviews...
Write a review